Flowers on bars
After a very rainy start of summer we had some good weeks in July. I have been busy working in the garden but I finally found some time to do some concreting. During spring I made some flowers and put them on iron bars. When casting, I used a large straw cut in shorter pieces and plugged in the end, to make the hole for the bar. The flowers where quite fun to paint. I have still a big bunch of roses to paint, maybe during winter I will find some time to do that. 
Vibration table
I have since long ago always wanted something that helps vibrating molds when casting. Last year I saw a very neat idea on you tube where they built a vibration table using a car tire and an electric motor. This I had to try! I already had an old motor and an old tire was easy to get. I screwed a plywood on top of the tire and then the motor underneath. On the motor shaft, I attached a small weight to get the vibrations. I had to adjust the weight on the shaft a couple of times to get it to vibrate as I wanted. It works like a treat. I just have to get it higher up because my back hurts when having it on the ground.
Spray paint
Using spray paint is fun. I bought some bottles with metallic paint and thought I would try this on a cast rhubarb leaf. All of a sudden I had painted several leaves! They are so beautiful! I have to paint more…
Glass globes becomes concrete balls
During winter and spring I have bought cheap old glass globes on flea markets. Whenever I find a cheap globe I will buy it. Also big glass vases and other glass items are useful if the shape is right. I fill them with concrete and after some days I put them in a bucket of water and crush the glass using a stone. Sometimes the glass will not come off directly, but if leaving it in water for a day will make it easier.
Horror in the pond
Last fall my daughter’s boyfriend bought a mask for a masquerade. I quickly snatched the package that the mask came in, because I saw a potential mold for casting. It was a flimsy plastic package shaped as the mask. Now I finally got to use it. I used sand to support the mold. I also did cast a pair of hands using dishwashing gloves.
Now, visitors in my garden will get a small shock when they are looking down in the pond!
Moahaha…
Monica
The post Newly cast stuff and building a vibration table appeared first on Monicas Creative Room.
